To build a beautiful fence in the country is considered not a simple process.
But following the instructions that will be discussed today, you can learn how to build a fence correctly, saving valuable time and effort.
Review Content:
Fencing
One of the common materials for the construction of a country fence is corrugated board, which has a lot of advantages.
Do-it-yourself installation of a fence from corrugated board helps to save valuable time due to the speed of the workflow.
It is only necessary to determine the necessary location of the fence, to mount the posts, which will subsequently be sheathed by means of corrugated board.
Material advantages
Such a fence reliably hides the site from prying eyes, especially in comparison with a fence constructed from a mesh.
Decking maximally reflects various sounds and acts as practical material that does not require professionalism in the installation.
To create a fence, the photo of which can be viewed below, it is preferable to purchase a corrugated board having a corrugation of about 20 mm in height. After all, a large height is intended mainly for the arrangement of the roof.
Installation of fencing from corrugated board
Before constructing the fence, it is necessary to perform the appropriate calculations. For this, it is necessary to outline the location of the future building, determine the location of the gate, as well as the gate.
In addition, it is important to determine where the posts for the fence will be equipped, to calculate its height along the perimeter as well as the height of the gate with a gate. The quantity of material directly depends on the listed parameters.
Then you should install the posts using metal pipes with a diameter of 80 mm or more. The upward part of the column should be welded to prevent moisture from entering the pipe.
To equip the pillars, you will need a pit whose width reaches 1.5 meters and a depth of 1 meter. Equip the foundation and after it has completely hardened, mount the profile, which is intended for fastening the profiled sheet.
The profile, as well as the poles, is important to fix with electric welding, then cover with a primer to prevent corrosion. At the final stage, fix the corrugated board on the frame with self-tapping screws.
Mesh railing
Fencing the site with a fence created from a netting net must begin with the exact marking of the placement of poles, for which metal pipes are used.
Depths of 40 cm are made under the intermediate pillars in the soil with brown, a depression of up to 60 cm is required under the tension-type posts.
As soon as the tension posts are installed in the corners of the intended fence, it is necessary to connect them by welding, or bolts with the posts next to them, using supports.
But such a fence will not turn out reliable, so you can not do without a wire rod, which must be skipped through the cells.
Note!
To tighten the wire rod between the pillars, in each, several holes should be drilled. You can mount the grid on prepared poles.
To learn how to make this fence with your own hands, place the roll in an upright position next to the supporting pillar and make sure that the curved sides of the lines are placed at the top of the roll. Attach a line at the top of the grid to the top of the post, then proceed to the other post, unwinding the roll slowly.
After the wire rod is passed through the net between the prepared poles, it is necessary to bring its ends into the holes that were prepared in advance, pulling the wire as much as possible, fixing it well on the surface of the poles, using tension type bolts.
Decoration of the fence
Often, the owners of suburban areas have a reasonable question related to the design of a wooden or other fence material in the country.
The first design option for the fence is, of course, its decoration with plants. A vertical gardening method is used. For this purpose, hops or grapes are suitable. It is also good to plant annual plants that twist along pre-stretched wires.
Note!
Another way to decorate the fence at the cottage is staining, as well as painting.
It is good to hang a special cache-pot with petunias on the deaf-type fence. These plants are completely unpretentious and bloom almost the entire warm season.
Deaf-type fencing will serve for many years in the construction of the gazebo, since you already have one wall surface, you will need a few additional supports, after which you can begin to install the roof.
Innovative technologies make it possible to build a fence from durable material. Also, the fence can have any height. It all depends on the preferences and wishes of the owner of the suburban area.
Therefore, focus on your wishes and financial opportunities and equip your possessions in the country!
DIY fence photo
Note!
DIY playground - 55 photos of the construction of an entertainment area
How to make a vise with your own hands: 64 photos of the basic rules for creating
DIY garage - 82 photos of building and summing up all the necessary systems and communications
Do-it-yourself paving slabs - 54 paving technology photos