To extend the service life of the phone, a special case will help, which prevents the appearance of cracks and micro damage. To date, a large selection of different models is presented in stores.
Most of us love unusual things that help us stand out from the crowd.
To diversify the design of a mobile phone helps a large number of removable covers and panels.
Buying the necessary accessory is quite simple. Another thing is to perform it yourself from a variety of materials at hand.
Here you can emphasize your individuality and exquisite taste. Our material presents several ways to create a cover with your own hands.
Review Content:
Materials for creating a protective cover
How to make a do-it-yourself case? Everything is quite simple. The main requirement of the whole process is the availability of free time and good imagination.
Various materials can be used to make the accessory:
- felt;
- jeans;
- silicone film;
- wide elastic;
The soft base of the materials protects the mobile phone from daily trials. There are no scratches or cracks on the glass surface.
Tools for making a mobile accessory
Before starting the workflow, it is recommended that you prepare all the tools.
These include:
- sharp scissors;
- ruler;
- button;
- glue;
- ribbon or lace;
- sticky base.
When working with each material, it is necessary to take into account its properties. For example, when cutting parts, the felt does not crumble at the edges, while denim needs additional border decoration.
Silicone film does not like frequent exposure to a sharp needle. To do this, use glue that dries in a few seconds.
The process of creating a phone case
The initial step in creating a cover is to pre-design the future accessory. To do this, you can draw a sketch of the product on paper. It is important to consider the size of the phone, as well as the location of the camera and microphone.
The finished case should be slightly larger than the size of the mobile phone. This will allow you to freely pull it out at every need. Fabric accessories do not require certain sewing skills. Here you need to carefully sew the two parts together.
The process of creating a cover is divided into several stages:
- Cut paper patterns.
- Transfer them to the material from which the cover will be made.
- Carefully cut out each detail setting aside 1 cm for seams. This technique allows you to sew the right product, taking into account the parameters of a particular model.
- To connect felt and denim, you will need a sharp needle and a strong thread.
- To make a silicone phone case, specialized glue will help.
- When all the parts are interconnected, you can fix the protective button, which will prevent the constant unfastening of the cover.
For people leading an active lifestyle, you need a sports case for your phone. Thanks to the dense elastic on the forearm, it is well fixed on the human body.
For this, a small piece of dense elastic is sewn to the finished protective product. In the process of movement, she will firmly press the body of the mobile to the hand.
Note!
The design of the phone book cover is a cover. On one side, the mobile phone case is fixed, and the other part serves as a protective panel. Tight fit of the upper part of the cover will provide small magnets, which are fixed in the upper corners of the cover.
Additional sections for storing plastic cards can be made using a multi-layer fabric structure.
To do this, you need three fabric bases, which differ in size.
The first part of the pocket is sewn to the base of the cover. All other elements are stitched together and fixed to the previous parts of the cover.
Decorative elements will help to create an exclusive accessory design for your phone. Appliques made of fabric will add zest to your product. Do not use colorful parts to design a cover.
Experienced designers recommend sticking to the “three colors” technique or monochrome shades. As a result, the finished product will not seem tasteless.
Note!
DIY phone case photo
Note!
