Here's a photo that shows a variety of methods for manually creating simple ribbon bows.
Review Content:
How to make a simple bow?
The most simple bow can be done independently as follows:
- Before starting work, prepare two ribbons (wide and narrow) of different colors. The length and width of the light tape is 20x5cm, and the dark one is 40x5cm, respectively.
- Next, fold a wide ribbon in the form of a loop and fasten the edges with glue.
- Repeat the same with narrow tape. To do this, put it upstairs wide, and fasten the ends of both of them with glue to each other.
- Take the remaining piece of narrow tape and tie it lightly in the middle of the resulting product.
- Free edges will allow you to fasten a bow for a gift or clothes
How to make a magnificent bow from a ribbon
There are many variations on this subject. Here is one simple way to make a satin bow at home:
- Get the tape in the store of the desired length and width. The longer it is, the more magnificent the product will be.
- Fold the tape with an accordion, tie the part in the middle with thread.
- To make a large bow from a satin ribbon, use several of these elements interconnected.
A wonderful bow to kindergarten or September 1, first-graders can easily be created using a two-meter tape in white.
To do this, perform the following steps:
- Prepare several segments of equal length (15cm).
- Fold them face up.
- At a distance of 2 cm from the bend, glue is applied.
- The bonding place is pressed with tweezers for strength.
- After the glue has dried, the bows can be turned out.
- The edges are fastened with a thread and sewn to the base (felt, cloth).
- Rhinestones and beads are suitable as an additional decoration.
Wide Ribbon Bows
Often when choosing a bow-tie, there are difficulties, since the store does not always have the model of the desired color.
A worthy solution to this problem will be the manufacture of such a tie from improvised materials. Here is a brief instruction:
- Prepare 2 pieces of tape of different lengths and widths: the first - 20x5, the second –18x3
- Fold each one in half, fixing the ends with glue
- For strong bonding, use a needle.
- Stitch both parts together.
- Pull the thread and fasten
The original decoration is considered to be "roses" - beautiful bows with their own hands.
Creation proceeds as follows:
- Wrap the tape on your hand, make a knot
- To straighten the "petals", bending them inward
- Repeat with each “petal”
Narrow Satin Ribbon Bow
Refinement and charm of your clothes will add an element of decor "Dior". Perform a kind of bow is not difficult:
- Cut elements of various lengths from tape
- Prepare from them coils in the form of an eight
- Lay them on top of each other from bigger to smaller
- Fasten the bow - for this you need to pass a small piece of tape of the same shade in the last turn
The finished product is suitable for any packaging box, it will be especially stylishly combined with a round and oval shape.
The following video will demonstrate the master class on how to make a lot of small bows from a narrow ribbon using a table fork.
Hair ornaments
A beautiful way to stand out will be hand-made bows for hairstyles. To do this, follow these points:
- Take 2 pieces of tape (5x25) and a thin tape
- To bend a corner at one edge of a wide tape
- The end of the second corner to combine with the first
- Connect the obtained corners with a needle to form a turn
- Then do the same near the corners. Turning the product over, make another corner (perform these steps until the triangle of the tape remains)
- The resulting "rhombus" bend twice in half
- Fold the free end so that a triangle forms
- Carefully hold it in the center so that the structure does not fall apart
- Remove the needles and bend the inner triangle to create a petal
- Flash item in the middle
After that, you should prepare another such part and connect both using a narrow tape. To attach the product to the hair, you need a clip or elastic band.
How to make a chic nylon ribbon bow
To the process of home needlework was not too time-consuming, it is enough to follow step-by-step steps:
- You will need 2 tapes of the same size (150x8)
- Double each and try to string it onto a needle and thread
- After finishing work, pull the thread so that the remaining length of tape is 30-40cm
- Make a knot and spread the resulting product
- Take a tight felt and prepare a circle (diameter 8cm)
- Make two holes in it and thread a thin ribbon into them.
- Stick the first tape to the base in a spiral, then the second.
- Cut the rest of the tape, and process the ends
DIY ribbon bows
Note!
Note!
Note!
